WARNINGS - CAUTION!
• This product MUST be cured before use - see instructions below.
• DANGER of carbon monoxide poisoning - NEVER light this product or let it smoulder or cool down in
confined spaces.
• This product is intended FOR OUTDOOR USE ONLY.
• NEVER leave a burning fire unattended.
• DO NOT overload the unit with fuel.
• FIRE HAZARD – Hot embers may emit while in use.
• WARNING DO NOT use petrol, white spirit, lighter fluid, alcohol or other similar chemicals to light a
fire as a rapid increase in temperature could damage the Firebowl.
• This product is ONLY suitable for use with charcoal, untreated wood, logs La Hacienda Heatblox and
Easylogs. DO NOT use coal.
• DO NOT use this Firebowl on decking or any other flammable surfaces such as dry grass, wood
chips, leaves or decorative bark.
• Ensure that the Firebowl is positioned at least 2 metres away from flammable items.
• DO NOT use this Firebowl as a furnace - ONLY use as a patio heater.
• DO NOT handle or move the Firebowl whilst alight as it will be hot.
• ALWAYS USE heat resistant gloves when in use as the unit will be hot.
• ALWAYS keep children and pets at a safe distance from the Firebowl when in use.
• NEVER burn fuel on the base of the Firebowl. Always follow the instructions below.
CARE & USE
• This product MUST be cured before use - see instructions below.
• Ensure that the Firebowl is positioned on a permanent flat, level, heat resistant non-flammable surface away
from flammable items.
• Ensure Firebowl has a minimum of 2m overhead clearance and has a minimum of 2m clearance from other
surrounding items.
• Decide on the location and place Firebowl on stand. The assembled Firebowl is heavy and it is therefore
recommended the unit is not moved once positioned and must not be moved whilst in use. If it is necessary to
move it once cooled, please use 2 persons to lift (do not drag) the firebowl across the floor.
• Before use, place a minimum layer of 5cm of normal (building) sand in the base. This will help protect
the Firebowl from excessive heat and cracking. Fuel must not be burnt directly on the Firebowl base.
• The Firebowl has been pre-treated with sealant but regular re-treating throughout the season with La
Hacienda Chimseal is recommended to extend the life and to protect the product from weathering.
• The Firebowl surface will age and discolour naturally – this is to be expected and will not affect use.
• For safety reasons, always inspect your Firebowl prior to use for signs of fatigue and damage and replace
your model as and when necessary.
• Always use heat resistant gloves during use and when adding fuel.
CURING THE FIREBOWL & GENERAL USE
• To start a fire, place a small quantity of kindling wood and rolled newspaper in the base of the unit on top of
the sand. Light the paper and allow a flame to build up. Once sufficiently alight add a small log
and allow to burn slowly.
• Allow the log to burn out and the firebowl to cool. Repeat this procedure at least twice more. This seals any
pores with soot and cures the firebowl. The firebowl is now ready for use. During use, only a couple of logs is
sufficient and produces enough heat.
• DO NOT overload the unit with fuel (untreated wood, logs, Easylogs, Heatblox or charcoal) – if the fire is too
intense this could damage the firebowl.
• Always use heat resistant gloves when adding fuel.
COOKING ON YOUR FIREBOWL
• Add approximately 1kg of charcoal into the firebowl on top of the sand, then light the charcoal.
• It is recommended that the unit be heated up and the fuel kept red hot for at least 30 minutes prior to first
cooking on the unit.
• DO NOT cook before the fuel has a coating of ash.
• Using heat resistant gloves and the tool provided, place the chrome plated cooking grill in the rim of the
firebowl ensuring the grill is stable.
• If refueling is required, always use heat resistant gloves and the tool provided to remove the grill as this
will be very hot.
• When finished DO NOT remove the grill until the unit has completely cooled.
Assembly guidelines
IMPORTANT – Remove any packaging before use, but retain safety instructions and store them with this
product.
ASSEMBLY
STEP 1 – Position Firebowl stand (4) onto permanent, flat, level, heat resistant, non-flammable surface away
from flammable items.
STEP 2 – Place Firebowl (3) into Firebowl stand (4).
STEP 3 – Add sand into the base (not included).
STEP 4 – Place cooking grill (2) onto the firebowl using the tool (5).
STEP 5 – Place mesh cover (1) onto the Firebowl (3) using the tool (5).
The product is now ready to use but please ensure you have read these instructions thoroughly prior to
use.
1.
2.
3.
4.
5.
4
