towards the general direction of the Frankfurt/Main transmitter (avoid positioning within close proximity
of metal frames or structures).
Note:
Users may be located in areas where atmospheric disturbances are the direct cause for not receiving the
DCF-77 frequency signal. During nighttime, atmospheric disturbances are usually less severe and reception
is possible in most cases. With a single daily reception, it is adequate for the alarm clock to keep time
deviation to below 0.5 seconds in a period of 24 hours.
When the clock is trying to receive the DCF signal, the reception icon will flash on the LCD. Once the signal
is “locked”, the DCF-77 tower icon will stay fixed on LCD and the received time will automatically correct the
manually set time. As well as the time, the date will also be received by the Projection clock and will be
displayed accordingly in the calendar section of the LCD.
ALARM SETTING:
Alarm time
Alarm ON icon
Alarm icon
To set alarm:
1.
Press and hold the AL/HR key, the (((
•
))) icon will appears and the AL icon on the LCD starts flashing.
2.
Set the hours and minutes of the desired alarm time by use of the AL/HR (hours) or the MODE/MIN
(minutes) keys respectively.
22
