background image

MANUAL TIME SETTING: 

 

Hours Setting  
(flashing) 

Minutes Setting 
(flashing)

 

 
 

 

In some cases after inserting the batteries, the Projection clock may not be able to receive the DCF-77signal. 
In this situation, the time should be manually set (before manual setting see 

Checking DCF-77 Reception

 

above). 
1. 

Press and hold the MODE/MIN key firmly while inserting the batteries until the time digits start flashing. 

2. 

Set the time by using the AL/HR and the MODE/MIN keys respectively.  

3. 

Press the SNOOZE key to enter the 

Calendar setting

 mode or wait for about 8 seconds for automatic 

timeout. 

 

Note:

  

The Projection clock will still try and receive the signal despite the time being manually set. When it 
receives the signal, then the DCF tower icon will stay fixed on the LCD. If reception has been 
unsuccessful, then the DCF tower icon will disappear but reception will still be attempted the 
following hour. 

 

CALENDAR SETTING 

The date default of the Projection Alarm clock is MO 1.1. in the year 2000. Once the radio-controlled time 
signals are received, the date is automatically updated. However, if the signals are not received, you can 
adjust the date manually. To do this: 

 

25

Summary of Contents for WT535















Reviews: