background image

 

 
POSITIONING THE SOLAR TRANSMITTER (SENSOR): 

It is important to place the Sensor in a bright environment for the solar panel to collect 
enough light to recharge the internal power cell. It is best mounted on an East wall to 
receive cool morning sun to charge. Under an overhang will provide protection from the 
overhead sun, which can cause temperature inaccuracies. 
 
The Sensor can be placed onto any flat surface or wall mounted using the bracket which 
doubles as a stand or wall mount base. 
 

WALL MOUNTING 
 

Secure the bracket onto desired wall using screws and plastic anchors. 

 
Clip the solar Sensor onto the bracket. 

 
Note:

 

The mounting surface can affect the transmission range. If, for instance, the Sensor is 

attached to a piece of metal, it may then either reduce or increase the transmitting range. For this 
reason, we recommend not to place the unit on any metal surfaces or in any position where a large 
metal or highly polished surface is in the immediate vicinity (garage doors, double glazing, etc.). 
Before securing the Sensor in place, please ensure that the Weather Station continuously receives 
the 915MHz signal from the Sensor from the desired location. 

 
SPECIFICATIONS: 
Indoor Temperature:  

Measuring range: 15.8°F to 139.8° 
                             

( “--.-“ or “--.0” is displayed when the indoor temperature is outside this range) 

Measured period: every 2 minutes 

Indoor Humidity: 

Humidity measuring range: 20% to 95%

 (

19%RH will be displayed if the reading is lower than 20%,   

                                                                 96% will be displayed if the reading is higher than 95%)

 

Measured period: every 2 minutes 

Outdoor Temperature: 

Measuring range: -39.2°F to 139.8°F 
                             

( “--.-“ or “--.0” is displayed when the indoor temperature is outside this range) 

Measured period: every 48 seconds 
 

WARRANTY INFORMATION 

La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing 
defects in materials and workmanship. 
 
This limited warranty begins on the original date of purchase, is valid only on products purchased 
and used in North America and only to the original purchaser of this product.  To receive warranty 
service, the purchaser must contact La Crosse Technology, Ltd for problem determination and 

Summary of Contents for WS-8120











Reviews: