![background image](http://html.mh-extra.com/html/la-crosse/bbb86095/bbb86095_instructional-manual_665336003.webp)
AA
AA
AA
AA
• Once batteries are installed, the clock will automatically search for
the atomic time signal at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• If there is no WWVB reception, the clock will search for the atomic
time signal every 2 hours until the WWVB time is received.
• After reception, this clock will only search for the atomic signal
after midnight.
• From normal time display, press and release the
SET
button to
search for the WWVB time signal.
• Please be sure you have selected your time zone from the list in the
Settings menu. When the Atomic time signal is received, the clock
will set to the time zone selected. Default is Eastern time.
•
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
Atomic Time Signal
Setup
1. Insert 2-AA batteries into the TX191 sensor according to polarity.
2. Insert 2-AA batteries into the clock.
3. After 5 minutes place sensor in a shaded outdoor location.
4. Set time and date.
BBB86095 www.lacrossetechnology.com/support Page |2