7
Screen two:
Contrast:
Select the contrast of the display from level 1 to 16
Saturation
: Select the saturation of the display from level 1 to 16
Radio-Controlled Reception:
(This function is not available for this unit.
Please keep this setting to
“
Off
”
)
Time Zone:
(This function is not available for this unit. Please keep this
setting to
“
Ohr
”
)
Time/Date
: Adjust: Year, Month, Date, Hour, Minute
Calendar Display Format
: Select between Day/Month or Month/Day display
Time Format:
Select between 24or 12-hour formats
Alarm
: Adjust the alarm time and enable/disable the alarm
Wireless Sensor Reception
: Automatic
–
default RF reception mode
Search now
–
Search for remote sensor
Temperature Unit:
Select between degree C & F for temperature
8
Screen three:
Weather Forecast
: Select between sunny, partly cloudy, cloudy, rainy & stormy
Rainfall unit
: Select between mm & inch
Wind unit
: Select between m/s, knots, mph & km/h
Sea Level Pressure
: Adjust the sea level pressure for your local area see chart
below. Pressure must be set in hPa but can be displayed in inHg.
Pressure Unit
: Select pressure unit between hPa, mmHg, inHg or mb
Remote Channel Display
: Automatic
–
Show
indoor and
the channel(s) being
registered
Indoor &
Channel 1 only
–
Shows only channel 1 reading only
Indoor &
Channel 2 only
–
Shows only channel 2 reading only
Indoor &
Channel 3 only
–
Shows only channel 3 reading only
NOTE
: Channel 1 is the Wind/Thermohygro sensor. Channels 2 & 3 are only
available if extra Thermohygro sensors were purchased. Extra sensors may not
be available at this time.
Clear All Rainfall Record Now
: Yes / No (clears hourly, daily, weekly, monthly
and total rain)
Default Setting
: Yes / No (All settings default back to set up).
S/W Version
: Software version (not upgradeable)
Air pressure is adjusted in the set up menu in hPa (hectopascal).
Please use this conversion chart to set the relative pressure.
Pressure can be displayed in inHg (inches of mercury), but needs to
be set in hPa.
