3
FEATURES:
x
Time display in 12/24 hour time format
x
Manual set time and date.
x
Time
alarm.
x
Calendar display (date, month, year)
x
Moon phase with 8 displays.
x
5 weather icons (sunny, partly cloudy. cloudy, rainy & stormy).
x
Temperature display in °F/°C: from -4 °F to +140 °F
x
Humidity display in RH%: from 20% to 99%
x
Relative air pressure reading in inHg/hPa:
x
6-hour pressure history graph
x
Wind speed and wind gust displayed in mph, km/h, m/s, and
knots: 0 to 67 mph
x
Wind chill in °F/°C: from -4 °F to +140 °F
x
Wind speed & direction with LCD compass display (16 steps)
x
Rainfall display in inch/mm: from 0” to 393.6”
x
Rainfall: total rain, last 24h, last week, last month
x
Memory: Supports USB flash drive (up to 32GB), SD & MMC
cards (up to 32GB)
4
INITIAL SETUP:
x
WIRELESS
DISPLAY:
Plug in the 5.0V adapter into the adapter socket on the right for
basic operation.
x
IR REMOTE CONTROL:
Pull out the battery insulation sheet from the bottom of the IR
remote control.
x
PHOTOS:
Save photos (Jpeg) to a USB flash drive, SD (secure digital) or
MMC (multi media card) memory cards.
Insert memory device into the wireless display.
x
WIND/THERMOHYGRO
SENSOR:
Select a mounting location within range of the wireless display.
Calibrate the direction of the wind: Hold the wind vane pointing
due north and do not allow it to turn.
Insert 2-AA batteries according to the polarity indicated. The red
LED indicator above the battery cover of the anemometer will
flash few times right after battery installation.
x
RAIN
GAUGE:
Select a mounting location within range of the wireless display.
Lift the rain gauge cover off its base. Then carefully remove the
packing tape from the bucket assembly.
Open battery cover and insert 2-AA batteries according to the
polarity indicated. Close the battery cover. Replace & lock the
rain gauge cover on the base.
x
SEARCH FOR SENSORS:
Go to the wireless display and enter SET UP mode. Scroll down
to WIRELESS SENSOR RECEPTION and select SEARCH NOW
