background image

 

5

 
To turn the alarm on press and release the “AL/HR” button.  The alarm icon (((

))) will 

be displayed in the lower right of the LCD to indicate that the alarm has been turned on. 
 
The alarm will sound for 100 seconds once activated.  By pressing the snooze button the 
alarm will be suspended for 8 minutes. 
 
Operation of the snooze function can be done in two ways: 

 

Press and release the “SNOOZE” button on the front of the travel alarm. 

 

With the travel alarm resting open on a flat surface, by gently pushing back on the 
top of the alarm. 

NOTE:  This movement causes the opened lid to activate a second snooze button which 
is located on the bottom of the travel alarm (it can be seen just below the battery 
compartment). 
 

Manual Time Setting Option 
 

You can also manually set the time on your travel alarm by pressing and holding the 
“MODE/MIN” button (figure two) on the front of your travel alarm for 4 seconds.  
 

 

The time zone abbreviation will appear in the LCD.  

 

Press and release the “Snooze” button once.  

 

The time will now flash in the LCD.  

 

Press and release the “AL/HR” button to advance the hours.  

 

Press and release the “MODE/MIN” button to advance the minutes.  

 

Press and release the “Snooze” button twice to return the normal display mode or 
wait 20 seconds and the travel alarm will automatically return to the normal 
display mode. 

 

TROUBLESHOOTING 
 
NOTE:

 For problems not solved, please contact La Crosse Technology via e-mail or 

phone, or visit our website, www.lacrossetechnology.com

 

 

Problem: 

The time and date will not set initially. 

Solution: 

It usually takes overnight before the clock can receive the signal due to the 
interference the sun has on the WWVB signal.  Wait overnight for the signal. 

Solution: 

Computer monitors and televisions can cause interference with the signal 

reception. Please keep the clock at least six feet from electrical sources. 

Solution: 

In some areas of the US, in particular on the East and West coasts, the signal is 

very weak. It may take up to 72 hours before a good signal is received. The 
reception can be helped by placing the clock in a window facing Colorado, 
with the back towards Colorado. 

 
 
MAINTENANCE AND CARE INSTRUCTIONS 

Reviews: