background image

 

3

 

1.

 

The travel alarm 

2.

 

Instruction manual 

3.

 

Warranty card 

 

ABOUT RADIO-CONTROLLED TIME - WWVB 

 
The NIST (National Institute of Standards and Technology—Time and Frequency 
Division) WWVB radio station is located in Ft. Collins, Colorado, and transmits the exact 
time and date signal continuously throughout the United States at 60 kHz.  The signal can 
be received up to 2,000 miles away through the internal antenna in the alarm clock.  Due 
to the nature of the Earth’s Ionosphere, reception is very limited during daylight hours.  
The alarm clock will search for a signal every night when reception is best.  The WWVB 
radio station derives its signal from the NIST Atomic clock in Boulder, Colorado.  A 
team of atomic physicists is continually measuring every second, of every day, to an 
accuracy of ten billionths of a second per day.  These physicists have created an 
international standard, measuring a second as 9,192,631,770 vibrations of a Cesium-133 
atom in a vacuum.  More information on the atomic clock and WWVB can be found at 

www.nist.gov

 

PROGRAM MODE 
 

Following is a list of steps to set up your new La Crosse Technology travel alarm clock. 
 

 

Please begin by removing the battery 
cover on the rear of the travel alarm 
shown in figure one.

 

 

Next insert one AA alkaline battery 
into the battery compartment making 
sure to observe the correct polarity. 

 

When inserting the battery be sure not 
to press any of the buttons on the 
travel alarm as this will interrupt the 
WWVB search and may cause the 
travel alarm to not pick up the radio-controlled time signal. 

 

Now replace the battery cover and face the travel alarm with the back of the unit 
towards Colorado (this has been found to help the unit pick up the WWVB 
signal). 

 

When the WWVB signal is received a tower icon will appear on the left side of 
the LCD display. 

 
NOTE:  Due to the nature of the WWVB signal it may take overnight for the travel alarm 
to receive the signal and set.  Adverse weather conditions may also affect the travel 
alarms’ ability to receive the signal.  In some cases it may take several nights for the 
travel alarm to set. 

Time Zone and DST (Daylight Saving Time) Setting

 

Figure One 

Reviews: