23
HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE
TRANSMITTER
The Temperature transmitter uses 2 x AAA, IEC LR3, 1.5V batteries.
When batteries will need to be replaced, the low battery icon will
appear on the LCD of the Temperature Station. To install and replace
the batteries, please follow the steps below:
1.
Remove the battery compartment cover.
2.
Insert the batteries, observing the correct polarity (see
marking).
3.
Replace the battery holder to the unit.
Note:
In the event of changing batteries in any of the units,
all
units need to be reset by
following the setup procedures. This is because a random security code is assigned by
the transmitter at start-up and this code must be received and stored by the Temperature
Station in the first few minutes of power supplying.
BATTERY CHANGE:
It is recommended to replace the batteries in all units regularly to ensure
optimum accuracy of these units. (Battery life –see
Specifications
)