WS6283 User Manuals
RF Transmission Procedure
The
main unit automatically starts receiving transmission from remote sensor for
temperature & humidity after batteries inserted.
The remote sensor will automatically transmit temperature and humidity data to the main unit
after batteries inserted.
If the main unit failed to receive transmission from remote sensor (“
- -.-
”and “--” display on
the LCD), Press and hold the
【
CH
】
button for 2 seconds, RF icon will be flashing
，
the
main unit will rescan the launch signal of the channel.
The main unit receive remote signals of up to 3 channels, press
【
CH
】
button to switch and
display data of different channels, when the symbol
appears, the data of different
channels will be displayed automatically every 5 seconds.
Maximum / Minimum numerical value of memory
When the temperature and humidity are shown in the LCD, the main unit began to record
temperature/ humidity maximum and minimum numerical value.
Press once
【 】
button, the LCD will display maximum value of temperature/ humidity, The
LCD will display the minimum value of temperature / humidity if press once
【 】
button again
when the maximum value is displayed.
at the same time, there are “
MAX
” or
“
MIN
”
displayed on the LCD.
The maximum / minimum value will RE records after press and hold
【 】
button 3 seconds.
The memory value of the day will be automatically cleared at 0:00 every night.
Weather forecasting function
Warning:
Please take the weather forecast from your local weather forecasting service into
account as well as the forecast from your weather station. If there are discrepancies between
the information from your device and from the local weather forecasting service, please take
the advice of the latter as authoritative.
The weather forecast is calculated from evaluation of fluctuations in the barometric pressure
and may deviate from the actual weather conditions.
The weather station displays the following weather symbols:
