background image

 

29 

 

3. 

Confirm with the SET key and enter the Weather forecast icon 
sensitivity setting. 

 

WEATHER FORECASTING ICON SENSITIVITY SETTING: 

For locations with rapid changes of weather conditions, the weather icons 
sensitivity can be set to a different level for faster display of weather 
conditions.  

 
 
 
 
 

 

1. 

The current sensitivity value will start flashing. 

2. 

Use the OUT/+ key to set the weather sensitivity level. There are 3 
levels of sensitivity: 2, 3 and 4. The value corresponds to the 
change of air pressure in hPa before the weather icon will switch to 
another state. Level 2 is the most sensitive setting (coastline); level 
4 is the slowest (desert) recording setting (default setting is "3"). 

3. 

Confirm with the SET key and exit the 

Manual settings

 

Flashing 

 

30 

 

TO EXIT THE MANUAL SETTING MODE 

To exit the manual setting mode anytime during the manual setting, press 
the SNOOZE/CH key or wait for automatic timeout. The mode will return 
to normal time display. 

 

ALARM SETTING: 
 
 
 
 
 

The alarm time can be set when pressing the ALM/DATE key. 
 
1. 

Press and hold the ALM/DATE key to enter the alarm set mode. 
The alarm digits flash. 

2. 

Use the IN key to set the alarm hour.  

3. 

Use the OUT/+ key to set the alarm minute. 

4. 

Confirm with SNOOZE/CH key and exit the 

Alarm setting

. The 

icon ((

)) will be displayed along with the set alarm time.

 

 

Alarm icon 

Alarm time 

 

31 

 

Note: 

If the calendar is displayed in the Weather station, the alarm is 

NOT active.  

 

To view and activate the alarm, press the ALM/DATE key. The 
alarm icon ((

)) and the alarm time will be displayed, indicating that 

the alarm setting is activated. 
 
The maximum alarm ring duration is 2 minutes. 

 
 

SNOOZE SETTING AND STOPPING THE ALARM:

 

 
The 10 minute snooze function can be set when the alarm is ringing by 
pressing the SNOOZE/CH key. 

 

When the alarm is snoozing, the alarm icon ((

)) will remain flashing 

indicating that the alarm is active but is in Snooze mode. To stop the 
snooze function when it is in snooze period, press any key except the 
SNOOZE/CH key. 

 

To stop the alarm, press any key (except for SNOOZE/CH). 

 

32 

 

 

MOON PHASES SYMBOL 

 

The Moon icon of the Weather station will also display all 12 Moon 
phases throughout the year according to the set calendar. 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

New Moon Small 

Waxing 
Crescent

Large 
Waxing 
Crescent

 

First 
Quarter

 

Small 
Waxing 
Gibbous
 

Large 
Waxing 
Gibbous

 

Small 
Waning 
Crescent

 

Large 
Waning 
Crescent 

Last 
Quarter

Small 
Waning 
Gibbous

 

Large 
Waning

 

Gibbous

 

Full Moon

 

Summary of Contents for WS-9049














Reviews: