background image

 

12

15. Specifications: 
 
Outdoor data:

 

Transmission range: 

 

80 feet max. in optimum environment 

Data transmission frequency: 

 

433.92MHz 

Data transmission interval: 

 

Approximately every 60 seconds 

Temperature range: 

 

-21.8 to +157.8

°

F (-29.9°C to +59.9°C, OFL is displayed outside this range) 

Temperature 

resolution: 

  0.1°F 

Outdoor humidity range: 

 

20% to 95% (if reading is less or greater than this range, reading will show - - %) 

Indoor humidity resolution: 

 

1% 

 

Indoor data: 

Indoor temp. measuring interval:  

Approximately every 15 seconds 

Indoor temperature range: 

 

32 to 140 

°

F (-0°C to +60°C, OFL is displayed outside this range) 

Temperature 

resolution: 

  0.1°F 

Indoor humidity measuring interval: 

Approximately every 20 seconds 

Indoor humidity range: 

 

1% to 99% 

Indoor humidity resolution: 

 

1% 

Air pressure measuring interval:  

Approximately every 15 seconds 

Relative air pressure set range:   

960 to 1040 hPa 

Air pressure resolution:   

 

0.1hPa 

 

Power Source: 

Weather Station: 

 

2 x AA, 1.5V batteries (Alkaline recommended) 

Thermo-Hygro Sensor: 

 

2 x AA, 1.5V batteries (Alkaline recommended) 

Battery life for all units: 

 

Approximately 12 months using alkaline batteries 

 

Dimensions (L x W x H): 

Weather Station (including stand): 

4.65” x 2.95” x 8.1” (118 mm x 75mm x 205mm) 

Thermo-Hygro Sensor(including stand):  2.95” x 2.2” x 6.3” (75mm x 55 mm x 160mm) 
 
 

WARRANTY INFORMATION 

La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and 
workmanship. 
 
This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to 
the original purchaser of this product.  To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem 
determination and service procedures.  Warranty service can only be performed by a La Crosse Technology, Ltd authorized service 
center.  The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse 
Technology, Ltd’s authorized service center. 
 
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or 
reconditioned parts or products if found to be defective during the limited warranty period specified above.  All replaced parts and 
products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd.  Replacement parts 
and products assume the remaining original warranty, or ninety (90) days, whichever is longer.  La Crosse Technology, Ltd will pay all 
expenses for labor and materials for all repairs covered by this warranty.  If necessary repairs are not covered by this warranty, or if a 
product is examined which is not in need or repair, you will be charged for the repairs or examination.  The owner must pay any shipping 
charges incurred in getting your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service center.  La 
Crosse Technology, Ltd will pay ground return shipping charges to the owner of the product to a USA address only. 
 
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the following specified exceptions: (1) 
damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance); (2) damage 
occurring during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative 
surface; (4) damage resulting from failure to follow instructions contained in your owner’s manual; (5) damage resulting from the 
performance of repairs or alterations by someone other than an authorized La Crosse Technology, Ltd authorized service center; (6) 
units used for other than home use (7) applications and uses that this product was not intended or (8) the products inability to receive a 
signal due to any source of interference..  This warranty covers only actual defects within the product itself, and does not cover the cost 
of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or 
performance variations resulting from installation-related circumstances. 
 
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER 
SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT.  THIS PRODUCT IS NOT TO 
BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION.  THIS PRODUCT IS NOT A TOY.  KEEP OUT OF 
CHILDREN’S REACH. 

Summary of Contents for WS-9018U














Reviews: