background image

POSITIONING THE REMOTE TEMPERATURE TRANSMITTER: 

Wall mount using the hole  on the back of the sensor. Best location is under the  eave (12-18  inches) on 
the North side of the home. 
 

WALL MOUNT:  

1. Install a mounting screw (not included) into a wall

—leaving approximately 3/16 of an 

inch (5mm) extended from the wall.  
2. Place the temperature transmitter onto the screw, using the hanging hole on the 
backside. Gently pull the transmitter down to lock into place 

 

NOTE: 

Always ensure that the transmitter locks onto the screw before releasing. 

 

TABLE STAND

: Not recommended as the transmitter may be blown over and 

damaged. 

 

 
NOTE

:

 

The mounting surface can affect the transmission range. If, for instance, the transmitter is 

attached to a piece of metal, it may reduce the transmitting range. For this reason, we recommend not to 
place the unit on any metal surfaces or in any position where a large metal or highly polished surface is in 
the immediate vicinity (garage doors, double-glazing, etc.). Before securing in place, please ensure that 
the Temperature Station can receive the 433MHz signal from the temperature transmitter at the positions 
that you wish to place them. 
 
Place the remote temperature transmitter outside in a dry, shaded area.  The remote temperature 
transmitter has a range of 100 feet (30 meters).  Keep in mind this distance is in open air with no 
obstructions and that radio waves DO NOT curve to go around objects.  Real-world transmission range 
will vary depending on what is in the path of the signal.  Each obstruction (roof, walls, floors, ceilings, 
thick trees, etc.) will effectively cut signal range in half.   

 
MAINTENANCE: 

 

Keep the temperature station in a dry place. 

 

Do not expose the display to extreme temperatures, vibration or shock. 

 

Clean it with a soft damp cloth. Do not use solvents or scouring agents. 

 

If the unit does not work properly, change the battery. 

 

Do Not Mix Old and New Batteries 

 

Do Not Mix Alkaline, Standard, or Rechargeable Batteries 

 

SPECIFICATIONS: 
 
Indoor Temperature

Range:   

32° F to 122° F (0° C to 50° C) 

Resolution: 

 

1° F/C 

Interval:  

57 seconds 

 

Outdoor Temperature

Range:   

-22° F to 140° F (-30° C to -60° C) 

Resolution: 

1° F/C 

Interval:  

57 seconds 

Power: 

Receiver: 

2-AAA, IEC, LR3 alkaline batteries. 

Transmitter: 

 2-AA, IEC, LR6 alkaline batteries. 

 

Dimensions: 

Receiver:  

2 ½” W x 1” D x 3 ¾” H 

Transmitter:  

1 ¾” W x 1” D x 4” H 

 

Summary of Contents for WS-9006U







Reviews: