background image

 

12

For warranty work, technical support, or information contact 
 

La Crosse Technology, Ltd 

2809 Losey Blvd. S.  

La Crosse, WI 54601 

Phone: 608.782.1610 

Fax: 608.796.1020 

 

e-mail 

[email protected]

 

(warranty work) 

[email protected]

 

(information on other products) 

 

Website 

www.lacrossetechnology.com

 

 
 
 
 
 

 
 
 
 
 
 

FCC ID: OMO-01RX (receiver) 

 

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.  
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 
 
1.  THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND 
2.  THIS DEVICE MUST ACCEPT INTERFERENCE RECEIVED, INCLUDING 
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. 
 
All rights reserved.  This handbook must not be reproduced in any form, even in 
excerpts, or duplicated or processed using electronic, mechanical or chemical 
procedures without written permission of the publisher. 
This handbook may contain mistakes and printing errors.  The information in this 
handbook is regularly checked and corrections made in the next issue.  We accept 
no liability for technical mistakes or printing errors, or their consequences. 
All trademarks and patents are acknowledged. 

Summary of Contents for WS-8055U













Reviews: