background image

 

15

 
 

F.  Weather measurement units (

°

F/

°

C, inHg/hPa) 

 

1.  Press and hold the 

“SET”

 button for 1 second. 

2.  Press and release the 

“SET”

 button 11 times. 

3.  The selected temperature units will now flash (

°

F default/factory 

setting). 

4.  Press and release the 

“+”

or 

“–“ 

button to select 

°

F (Fahrenheit) or 

°

C (Celsius). 

5.  Press and release the 

“SET”

 button to advance to the barometric 

air pressure units setting. 

6.  The selected air pressure units will now flash (inHg default/factory 

setting). 

7.  Press and release the 

“+”

or 

“–“ 

button to select inHg (inches of 

Mercury) or hPa (hectopascal or millibars). 

8.  Press and release the 

“SET”

 button to advance to the barometric 

air pressure calibration setting. 

9.  The air pressure reading will now flash (29.91 inHg, 1012.8 hPa as 

default).

 

10.  Press and release the 

“+”

or 

“–“ 

button to adjust to the correct 

relative air pressure based on local reports.

 

11.  Press and release the 

“SET”

 button to advance to the forecast 

sensitivity setting.

 

 

Note:

 Barometric air pressure is usually reported as “relative air 

pressure”. This reading is based on the combination of absolute air 
pressure and altitude. In general, an increase in altitude will result in a 
decrease in air pressure. Relative air pressure will make readings in 
nearby locations relative to each other to allow for proper forecasting. 
The absolute air pressure reading in the Weather Center cannot be 
calibrated, only the relative air pressure.

 

 
12.  The selected forecast sensitivity setting will now flash (0.09 inHg 

default). 

13.  Press and release the 

“+”

or 

“–“ 

button to select 0.06, 0.09, or 0.12 

inHg (if hPa is selected, the choices will be 2, 3, or 4). A lower 
setting will result in a quicker change in the forecast icon. In other 
words, if the setting is 0.06 inHg, the forecast icon will change if 
the air pressure changes by at least 0.06 inHg within a six-hour 
period. This is useful, as certain areas will have a change of air 
pressure but no change in weather. 

14.  Press and release the 

“SET”

 button to advance to the storm 

warning setting. 

15.  The selected storm warning level will now flash (0.15 inHg, 5 hPa 

default).

 

Summary of Contents for WS-8015TWC


































Reviews: