21
H)
SELECTING
F OR
C
1)
Hold down the
“SET”
button for 2 seconds (the selected time zone will
flash).
2)
Press and release the “
SET”
button 10 times until the default “
F” flashes in
the time LCD.
3)
Press and release the
“+”
button to toggle between
F and
C.
4)
Press and release the
“SET”
button to confirm the
F or
C selection and
exit the program mode.
VIII)
FEATURES & OPERATIONS
A)
CHANGING DISPLAY MODE (DAY, SECONDS, AND
TEMPERATURE)
There are three possible display modes to view the day, seconds, and
temperature. The
month&date/weekday /indoor temperature/remote temperature
is the default.
To change the display:
1)
Press and release the
“+”
button.
2)
The display should now show the
month&date/weekday/seconds/remote
temperature
3)
Press and release the
“+”
button.
4)
The display will now show the
month&date/seconds/indoor
temperature/remote temperature.
5)
Press and release the
“+”
button.
6)
The display will return to the normal display.
B)
THE ALARM
1)
SETTING THE ALARM
Note: The duration of the alarm is 85 seconds. After each of the first two 25
second periods, the rate of the alarm increases.
(a)
Hold down the
“ALARM”
button for 5 seconds.
(b)
The “TIME” icon to the right of the minutes (in the time LCD) shifts to
“ALARM” and the hour digit of the alarm flashes.
(c)
Press and release the
“+”
button to set the alarm hour.
(d)
Press and release the
“ALARM”
button to confirm the hour and to set
the alarm minutes.
(e)
The alarm minutes flash.
(f)
Press and release the
“+”
button to set the alarm minutes.
(g)
Press and release the
“ALARM”
button to confirm and to exit the alarm
setting mode.
22
Note: The alarm will be automatically set to sound when exiting the alarm-
setting mode (indicated by the alarm “sound” icon to the right of the time).
2)
ACTIVATING/DEACTIVATING THE ALARM
(a)
The alarm will be automatically set to sound when exiting the alarm-
setting mode (indicated by the alarm “sound” icon to the right of the
time).
(b)
Press and release the “
ALARM”
button to activate and deactivate the
alarm. The alarm “sound” icon to the right of the time will appear or
disappear, and the alarm time will be displayed briefly before returning
to the normal display mode.
3)
ACTIVATING THE SNOOZE FUNCTION
While the alarm is sounding, press and release the
“SNOOZE”
button to
activate the snooze function.
The alarm “sound” icon and “SNOOZE” icon (to the right of the time) will
flash.
The duration of the snooze function is 10 minutes, then the alarm will
resume.
4)
SUSPENDING ALARM
While the alarm is sounding or the SNOOZE is active, press and release the
“ALARM”
button to suspend the alarm until the next day.
C)
INDOOR TEMPERATURE
The Indoor temperature appears on the right side of the Date LCD. The
temperature is checked every 10 seconds, and updated whenever there is a
change.
D)
REMOTE TEMPERATURE
The remote temperature will be shown on the right side of the lower LCD
screen. The temperature clock receives the outdoor temperature (
F or
C) from
the remote temperature sensor, and the temperature appears in the OUTDOOR
LCD. The remote temperature sensor transmits a new temperature to the
weather temperature clock 3 times every 10 minutes.
