6
III) DST (DAYLIGHT SAVING TIME) SETTING
Note:
The DST default (factory) setting is “On”, meaning that the WWVB will
automatically change the time according to Daylight Saving Time in the spring and
fall. For areas that do not recognize DST changes (Arizona and parts of Indiana)
turn the DST “OFF”.
1) “On” will be flashing in the time LCD and “DST” flashes where the
Weekday normally appears.
2) Press and release the “+” button to turn the DST off, as will be indicated by
the display of “OFF” in the time LCD.
3) Press and release the
“SET”
button to confirm the DST setting and to
advance to select the language for the weekday.
IV) LANGUAGE SELECTION FOR THE WEEKDAY
1) The default language “US” will be flashing in the time LCD.
2) Press and release the
“+”
button to select the desired language. There are 3
languages to select from:
US English
F French
E Spanish
3) Press and release the “
SET”
button to confirm the language setting and to
advance to manually set the time.
V) TIME SETTING
Note:
When the WWVB signal is found, that time will over-ride the manually set
time.
1) The hour “12” will be flashing in the time LCD.
2) Press and release the
“+”
button to select the hour.
Note:
When setting the hour, “PM” will appear to the left of the hour display, if
it is AM nothing will be displayed.
3) Press and release the
“SET”
button to confirm the hour setting and to shift
to select the minutes.
4) The minute area will now be flashing.
5) Press and release the
“+”
button to select the minutes.
6) Press and release the
“SET”
button to confirm the time setting, and to
advance to manually set the calendar.
