background image

 

12

TROUBLESHOOTING 
Problem: 

The LCD is faint. 

Solution: 

Replace the batteries. 

Problem: 

“OFL” appears in the LCD. 

Solution: 

Move unit to an area with warmer or cooler surrounding 
temperature.  Current surrounding temperatures are outside 
measuring range. 

Problem: 

No reception of WWVB signal. 

Solution: 

1)  It may help reception to face the front of the Moon Phase 

Clock in the general direction of Ft. Collins, Colorado. 

2)  Wait overnight for signal. 
3)  Be sure the Moon Phase Clock is at least 6 feet from any 

electrical devices, i.e. TV sets, computers, or other radio 
controlled clocks. 

4)  Remove batteries for five minutes, reinsert and leave the unit 

overnight without pressing and releasing buttons. 

5)  If problems persist contact La Crosse Technology. 

Problem: 

Hour is incorrect (minute and date are correct). 

Solution: 

Be sure correct time zone and daylight saving time are selected. 

Problem: 

Moon phase is incorrect. 

Solution: 

1)  Check the calendar data. 
2) Check batteries. 
3)  Contact La Crosse Technology. 

 

Note:

 For any questions not answered, contact La Crosse Technology with the contact 

information found at the end of this instructional manual. 
 

SPECIFICATIONS 
Temperature:

 

Measuring range: 

32

°

F to 122

°

F with 0.2

°

F resolution 

(0

°

C to 50

°

C with 0.1

°

C resolution) 

Checking intervals: 

Every 10 seconds 

Power source:

 

Battery type: 

2 x AA, IEC LR6, 1.5V (Alkaline) 

Battery life: 

Approximately 12 months 

Dimensions (L x W x H): 

11.4 x 0.98 x 7.5 in (290 x 25 x 190mm) 

 

Summary of Contents for WS-8007CTWC















Reviews: