5
PROGRAM MODE
To enter the Program Mode hold down the “
SET”
button for 2 seconds, until “-5EST”
flashes in the Date LCD. The Program Mode is laid out in a manner that allows you to
program each function separately, or you can follow the instructions entirely to program
the Moon Phase Clock. Complete programming is usually done for the initial set-up, and
will require you to skip step 1 of programming sections III through VIII. Press the
“
SNOOZE”
button at any time to exit the Program Mode, or wait approximately 15
seconds for the Moon Phase Clock to automatically return to normal operation.
I) FUNCTION
BUTTONS
There are 4 function buttons located on the backside of the Moon Phase Clock. The
function buttons are labeled:
SET, +, ALARM,
and
SNOOZE.
II) TIME ZONE SETTING
1) Hold down the “
SET”
button for 2 seconds, the default setting “-5EST” will
flash in the Date LCD.
2) Press the “+” button to select the appropriate time zone. There are 13 time
zones to choose from:
-5EST
Eastern Time (default setting)
-6CST Central
Time
-7MST Mountain
Time
-8PST Pacific
Time
-9ALA Alaskan
Time
-10HAW
Hawaiian Time
-11
-12
GMT
Greenwich Mean Time
-1
-2
-3
-4ATL Atlantic
Time
3) Press the “
SET”
button to confirm the time zone setting, and to advance to
DST (Daylight saving time) setting.
