background image

 

23

Technology, Ltd will pay all expenses for labor and materials for all repairs covered 
by this warranty.  If necessary repairs are not covered by this warranty, or if a 
product is examined which is not in need or repair, you will be charged for the 
repairs or examination.  The owner must pay any shipping charges incurred in 
getting your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd 
authorized service center.  La Crosse Technology, Ltd will pay ground return 
shipping charges to the owner of the product to a USA address only. 
 
Your La Crosse Technology, Ltd warranty covers all defects in material and 
workmanship with the following specified exceptions: (1) damage caused by 
accident, unreasonable use or neglect (including the lack of reasonable and 
necessary maintenance); (2) damage occurring during shipment (claims must be 
presented to the carrier); (3) damage to, or deterioration of, any accessory or 
decorative surface; (4) damage resulting from failure to follow instructions 
contained in your owner’s manual; (5) damage resulting from the performance of 
repairs or alterations by someone other than an authorized La Crosse Technology, 
Ltd authorized service center; (6) units used for other than home use (7) applications 
and uses that this product was not intended or (8) the products inability to receive a 
signal due to any source of interference..  This warranty covers only actual defects 
within the product itself, and does not cover the cost of installation or removal from 
a fixed installation, normal set-up or adjustments, claims based on misrepresentation 
by the seller or performance variations resulting from installation-related 
circumstances. 
 
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR 
INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR 
DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF 
THIS PRODUCT.  THIS PRODUCT IS NOT TO BE USED FOR MEDICAL 
PURPOSES OR FOR PUBLIC INFORMATION.  THIS PRODUCT IS NOT A 
TOY.  KEEP OUT OF CHILDREN’S REACH. 
 
This warranty gives you specific legal rights.  You may also have other rights 
specific to your State.  Some States do no allow the exclusion of consequential or 
incidental damages therefore the above exclusion of limitation may not apply to you. 
 
For warranty work, technical support, or information contact:

 

 

La Crosse Technology 

2809 Losey Blvd. S. 

La Crosse, WI 54601 

Summary of Contents for WS-7215U-IT


























Reviews: