background image

 

9

5.  Press and release the 

“SET”

 button to confirm and advance to 

the Time setting mode. 

 

V.   TIME 

 

There are two methods by which the time can be set:   
A) Automatically via WWVB reception or 
B) Manually. 

 

A.  WWVB (Remote Control Time) 
 

This method requires you to do nothing except wait for the signal 
to be received and to select a time zone.  Reception usually takes 
approximately 6-10 minutes during optimal conditions.  The best 
conditions for reception is at night, between midnight and 6:00 
AM—when there is less atmospheric interference.  To keep your 
time as accurate as possible, the weather station conducts a 
WWVB search every night between these hours and overrides any 
manually set time. The WWVB tower icon (appearing in the TIME 
LCD) will flash when a signal-search is in progress, will remain 
steady when the signal has been received and nothing will be 
displayed in all other situations.  If the WWVB time has not been 
received after 10 minutes of battery installation, you may manually 
set the time or leave the time function alone (reception will occur 
regardless). 
 

B.  MANUAL TIME SETTING 
 

 

1. 

Press and hold the 

“SET”

 button for 3 seconds or until “12h” 

flashes in the DATE LCD. 

2. 

Press and release the 

“SET”

 button 3 more times (until the 

hour digit flashes in the TIME LCD). 

3.

 

Press and release the 

“CH”

 button to change the hour.  Press 

the 

“CH”

 button once and the hour will increase by one, 

twice and the hour will increase by two, etc.   

4.

 

Press and release the 

“SET” 

button to confirm the hour 

setting and to advance to the minute setting mode. 

Summary of Contents for WS-7025U


























Reviews: