background image

8

WARRANTY INFORMATION

La Crosse Technology, Ltd provides a 1-year limited warranty on this product against 

manufacturing defects in materials and workmanship.

This limited warranty begins on the original date of purchase, is valid only on products 

purchased and used in North America and only to the original purchaser of this product.  To 

receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem 

determination and service procedures.  Warranty service can only be performed by a La 

Crosse Technology, Ltd authorized service center.  The original dated bill of sale must be 

presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse 

Technology, Ltd’s authorized service center.

La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge 

as stipulated herein, with new or reconditioned parts or products if found to be defective 

during the limited warranty period specified above.  All replaced parts and products become 

the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, 

Ltd.  

Replacement parts and products assume the remaining original warranty, or ninety (90) days, 

whichever is longer.  La Crosse Technology, Ltd will pay all expenses for labor and materials 

for all repairs covered by this warranty.  If necessary repairs are not covered by this warranty, 

or if a product is examined which is not in need or repair, you will be charged for the repairs or 

examination.  

The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd 

product to a La Crosse Technology, Ltd authorized service center. 

Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship 

with the following specified exceptions: (1) damage caused by accident, unreasonable use or 

neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring 

during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, 

any accessory or decorative surface; (4) damage resulting from failure to follow instructions 

contained in your owner’s manual; (5) damage resulting from the performance of repairs 

or alterations by someone other than an authorized La Crosse Technology, Ltd authorized 

service center; (6) units used for other than home use (7) applications and uses that this 

product was not intended or (8) the products inability to receive a signal due to any source of 

interference.

This warranty covers only actual defects within the product itself, and does not cover the cost 

of installation or removal from a fixed installation, normal set-up or adjustments, claims based 

on misrepresentation by the seller or performance variations resulting from installation-related 

circumstances.

LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, 

CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE 

OPERATION OR MALFUNCTION OF THIS PRODUCT.  THIS PRODUCT IS NOT TO BE 

USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION.  THIS PRODUCT IS 

NOT A TOY.  KEEP OUT OF CHILDREN’S REACH.

W177.indd   8

9/15/07   10:21:37 AM

Summary of Contents for WS 450











Reviews: