36
Note:
It is important to keep all the connected extension heads away
from rain, moisture and other extreme weather conditions as
exposure can cause short circuits and damage to this item.
18.
Changing batteries
Battery change only in the thermo-hygro-sensor:
1.
Open the battery cover
2.
Remove the old batteries and insert with new ones of the
recommended type and replace the cover
Once the sensor is powered up, press and hold the PLUS (+)
key for approx. 2 seconds in the normal display mode, the
base station will sound a short beep and synchronize to the
sensor otherwise no weather data will be received.
Battery change only in the base station:
1.
Connect power adaptor to base station and power outlet.
2.
Open the battery cover located at the back of the base
station.
3.
Remove the old batteries, insert with new ones of the
recommended type and replace the cover
This method of battery replacement will result in no loss of
MIN/MAX and history data. However in case of possible
power failure, the base station will lose the MIX/MAX and all
weather data recordings and will need to be synchronized to
the sensors again by pressing the PLUS (+) key for 2
seconds.
Note:
When batteries require replacement for the base station, the
low battery indicator will light up on the LCD.
Please participate in the preservation of the
environment by properly disposing of all used-up
batteries and accumulators at designated
disposal points. Never dispose of batteries in a
fire as this may cause explosion, risk of fire or
leakage of dangerous chemicals and fumes
