46
2. Press and hold the SET key for about 2 seconds, then the "RESET" icon will
appear at the bottom part of the LCD.
3. Press
the
+
key once, then the stored value will be reset to the current value and
current time.
4. Press
the
ALARM
key to return to normal display mode.
10.
Total rainfall amount
The total rainfall measurement is displayed in the fourth section of the LCD, in the unit
of mm or inch. It shows the total rainfall accumulated since last reset of the Weather
Center.
In normal display mode, press the
MIN/MAX
key 10 times to show the total rainfall
value. The "RESET" icon will also be shown at the same time.
Total rainfall
value
The total rainfall value is counted
from this time and date
47
To reset the rainfall reading, press the
+
key once when the Rainfall value and "Reset"
icon is shown. Then the total rainfall amount will be reset to 0, and the time updated to
current time.
Note:
After power up, the time and date and total rainfall is displayed as "- - -". After time is
adjusted manually, the set time will be shown.
SWITCHING ON/OFF THE BUZZER
User may choose to turn off the buzzer so that when the time alarm is switched on
and activated, the buzzer will not sound but we can still see the alarm icon (((
y
)))
flashing on the LCD for time alarm.
On the other hand, when the buzzer is turned off and any weather alarm is activated,
the particular weather digits will flash to show user that the weather condition is being
out of the preset threshold value, yet the buzzer will not sound.
To switch off the buzzer:
1.
In normal display mode, press and hold the
SET
key until the icon "BUZZER
OFF" is shown at the right side above the Wind direction scale. The LCD will
change to setting mode.
2. Press
ALARM
key once to return to the normal display mode. The "BUZZER
OFF" icon will still be shown.
