30
HIGH AND LOW OUTDOOR HUMIDITY ALARM SETTING
Note:
The High and Low outdoor humidity alarm can be set On/Off independently according
to your needs.
Set the Outdoor temperature alarm value (High or Low alarm value):
1.
In the normal display mode, press the
ALARM
key 4 times. The High Outdoor
Humidity alarm display will be shown.
2. Press
and
hold
the
SET
key for about 2 seconds. The humidity digit will start
flashing. Press the
+
or
MIN/MAX
key to set the high outdoor humidity alarm
value.
3. Press
the
ALARM
key to confirm the setting. The digit will stop flashing. Press
the
SET
key to switch on or off the alarm. (The showing of the icon (((
y
)))
means that the alarm is switched on.)
4. Press
the
ALARM
key once. The Low Outdoor humidity alarm display will be
shown.
5. Press
and
hold
the
SET
key for about 2 seconds. The humidity digit will start
flashing. Press the
+
or
MIN/MAX
key to set the low outdoor humidity alarm
value.
31
6. Press
the
ALARM
key to confirm the setting. The digit will stop flashing. Press
the
SET
key to switch on or off the alarm. (The showing of the icon (((
y
)))
means that the alarm is switched on.)
7. Press
the
HISTORY
key or wait for about 30 seconds and the display will
return to normal display mode automatically.
In case the humidity value meets the condition for high alarm or low alarm, the value
will be blinking, along with the corresponding icon ("HI AL"/ "LO AL"). And the buzzer
will ring for 2 minutes. User may press any key to stop the sound.
WIND SPEED ALARM SETTING
The high wind speed alarm can be set by following the steps below.
1.
In the normal display mode, press the
ALARM
key six times. The High wind
speed alarm display will be shown.
2. Press
and
hold
the
SET
key for about 2 seconds. The wind speed digit will start
flashing. Press the
+
or
MIN/MAX
key to set the high wind speed alarm value.
3. Press
the
ALARM
key to confirm the setting. The digit will stop flashing. Press
the
SET
key to switch on or off the alarm. (The showing of the icon (((
y
)))
means that the alarm is switched on.)
