8. A good location is under the eaves on the north side of the house. You can also build a small roof or box
for it if you do not have an overhang. Please be sure it is well vented.
9. Your Wind cord, must be plugged into the Thermo-hygro sensor before installing batteries. Be sure the
cord is secured from blowing around (do not staple or pinch), and occasionally check for animals chewing
through.
– Program Set Up
There are five function keys: SET, +, HISTORY, ALARM, and MIN/MAX. You begin by pressing the SET
button until the display flashes. When you press and release the SET button after each step, you will be
moved to the next step. You may exit the programming mode at any time by pressing the ALARM button.
If you stay at the set mode for more than 30 seconds, the unit will return to normal display mode. If you
want to change the settings, you just need to press the function keys you need. At this stage, the unit will not
return to the normal display mode. After changing the settings, you can press and release the SET button to
get to the next step.
1. CONTRAST SETTING:
Press and hold the SET button for two seconds. LCD and a number from 1-8 will be flashing. To increase
the contrast of the LCD display, press and release the PLUS button. To decrease the contrast of the LCD,
press and release the MIN/MAX button. Press and release the SET button once to move to the next menu
item.
2. SETTING THE HOUR MANUALLY:
The Hour will be flashing. Use the PLUS button to increase the hour. Use the MIN/MAX button to decrease
the hour. If using 12-hour Time Mode, be sure to set the hour for AM or PM. Press and release the SET
button once to move to the next menu item.
3. SETTING THE MINUTES MANUALLY:
The Minutes will be flashing. Use the PLUS button to set the minutes. Press and release the SET Button
once to move to the next menu item.
4. 12/24-HOUR TIME MODE:
Either 12h or 24h will be flashing on the display. Use PLUS or MIN/MAX button to change from 12 to 24
hour format time (12h for AM/PM, 24h for world time). Note: When in the 12h mode, there is only a "PM"
display, which appears under the word TIME. During the "AM" hours, this area will be blank. Press and
release the SET button once to move to the next menu item.
5. SETTING THE YEAR MANUALLY:
The Year will be flashing. Use the PLUS or MIN/MAX button to set the year. Press and release the SET
button once to move to the next menu item.
6. SETTING THE MONTH MANUALLY:
The Month will be flashing. Use the PLUS or MIN/MAX button to set the month. Press and release the SET
button once to move to the next menu item.
7. SETTING THE DATE MANUALLY:
The numeric day will be flashing. Use the PLUS or MIN/MAX button to set the date correctly. (The unit
will determine the Day of the week automatically.) Press and release the SET button once to move to the
next menu item.
8. SETTING FAHRENHEIT OR CELSIUS:
A degree symbol will be flashing, followed by F or C. Use the PLUS or MIN/MAX button to select F or C.
Press and release the SET button once to move to the next menu item.
9. WIND SPEED UNIT OF MEASUREMENT:
MPh should now be flashing. To change, press and release the PLUS or MIN/MAX button to select MPH,
KM/h, or M/S. Press and release the SET button once to move to the next menu item.
10. RAINFALL READING:
Inch should now be flashing. To change, press and release the PLUS or MIN/MAX button to select MM if
desired. Press and release the SET button once to move to the next menu item.
11. RELATIVE AIR PRESSURE UNIT:
