La Crosse Technology, Ltd
Page 5
1.
From normal time display, press and release the ALARM button to activate or
deactivate alarm.
2.
Alarm time will show for 3 seconds (with or without bell icon). Everything else
disappears on screen.
3.
Alarm icon will show when active and disappear when deactivated.
•
Alarm icon will flash when alarm sounds.
•
When alarm sounds, press any button except for LIGHT/SNOOZE to stop ringing for
one day
Snooze Alarm
Snooze
•
When alarm sounds, press LIGHT/SNOOZE button to stop the alarm and activate
SNOOZE function. SNOOZE - duration will show in date area. Alarm icon will flash.
•
During snooze count down, press any button except for LIGHT/SNOOZE to exit snooze
count down
•
During snooze count down, press LIGHT/SNOOZE only to change backlight
•
When snooze alarm sounds, SNOOZE – duration “00 m 00” will flash. Clock beeps for
2 minutes then returns to normal display or press any button to stop ringing and return
to normal display. Press any button except for LIGHT/SNOOZE to stop alarm and exit
snooze function.
•
Repeat: When snooze alarm sounds, SNOOZE – duration “00 m 00”” will flash, for up
to 2 minutes with alarm sounding. Press LIGHT/SNOOZE button to stop the sound and
activate the snooze function again.
USB Charge Port
Explanation: The alarm clock has an integrated USB charging port that will charge a
device when the alarm clock is operated on AC power.
Note: This is a power-output charging port. It does not supply power to the projection
alarm.
•
Connect your external device’s USB charging cable (not included) to the USB charging
port.
•
Charging times will vary.
•
USB Power Output: 1.0A maximum current
•
Charge 1.0A devices or devices that are self-regulating
Note: Some USB cables are for data transfer only and cannot be used for charging. Make
sure that the USB cable you use will charge your device. Most USB cables included with
mobile devices will work for charging.
Note: Many devices may require more power to charge than provided by this alarm clock.
Moon phase is incorrect.
•
Check that your Year, Month, and Date are correct.
