La Crosse Technology, Ltd
Page 4
ALARM HOUR: Hold the ALARM button to enter alarm time setting mode. The Alarm Hour
will flash. Use the UP or DOWN buttons to set the Hour. Press and release the ALARM
button.
ALARM MINUTE: The Alarm Minutes will flash. Use the UP or DOWN buttons to set the
Minutes. Press and release the ALARM button to exit.
Activate/Deactivate Time Alarm
ACTIVATE:
Press and release the ALARM button to activate the alarm. The alarm bell icon appears
when alarm is active.
DEACTIVATE:
Press and release the ALARM button to deactivate the alarm. The alarm icon will disappear
when alarm is inactive.
Note:
When the alarm sounds, it will continue for two minutes then shut off.
Snooze Alarm
When the alarm sounds, press the SNOOZE/LIGHT button to trigger snooze alarm for 10
minutes.
The snooze icon
Zz
will flash when the snooze feature is active.
To stop alarm for one day, press ALARM button, while in snooze mode.
The alarm icon (bell) will remain solid.
Atomic Wall clock has distorted or frozen display
Explanation:
On a brand new wall clock, check for thin plastic film of
printed scratch guard
that may be on the screen of the wall clock. This thin piece of plastic has printed numbers for
store displays. When the batteries are installed, the “real” numbers show behind the printed
scratch guard and create distortion.
With all power removed, the wall clock should be blank.
If numbers still appear, please check for scratch guard.
Power:
Check that the batteries are installed correctly.
This is generally a power related issue.
Batteries
may be overpowered or underpowered.
Remove batteries from wall clock.
Press any button 20 times. Leave the batteries out of the display for 2 hours.
Insert and batteries into the wall clock.
Atomic Wall clock is blank: No letters, numbers or dashed lines
Check that the batteries are installed correctly.
Batteries
may be overpowered or underpowered.
Remove batteries from wall clock.
Press any button 20 times. Leave the batteries out of the display for 2 hours.
Insert batteries into the wall clock.
Atomic Wall clock drains batteries quickly
Test a new set of alkaline batteries. Write down the date of installation and the voltage of the
batteries.
When the batteries fail, please note the date and voltage again. This is helpful in
determining the problem.
Check for leaking batteries, which may damage the wall clock.
