La Crosse Technology, Ltd
Page 3
Dependent on your location, position of the clock in your home, and atmospheric
interference, it may take up to 5 nights for the change from Daylight Savings Time to
Standard Time and vice-versa to occur.
Check for a
WWVB
Tower Icon showing on the atomic wall clock. The tower icon indicates
you have received the WWVB signal from Ft Collins CO in the past 24 hours.
Check that the clock is in the correct
Time Zone
.
Check whether the DST indicator is ON or OFF. If the indicator is OFF the clock will not
change.
Check for fresh
batteries
. Without proper batteries, the antenna will have a harder time
picking up the signal.
Position the atomic wall clock in a window (
with the front or back
) facing Ft. Collins,
Colorado and leave for up to five nights. If you do not have a window facing this direction,
position the clock near an outside wall and point the unit in this general direction.
Manually Set Time/Date: Program Menu
The
SET °F/°C
button
will move through the program menu. The
UP
or
DOWN
buttons
will
change a value.
WWVB ON/OFF: WWVB and the word ON will flash. Press and release the UP or DOWN
buttons to change to OFF. Confirm with the SET °F/°C button and move to the next item.
TIME ZONE: EST will flash in the lower display. . Press and release the UP or DOWN
buttons to select the correct Time Zone. Confirm with the SET °F/°C button and move to the
next item.
DAYLIGHT SAVING TIME: DST will flash and the word ON. Press and release the UP or
DOWN buttons to turn this to OFF if you do not observe DST. Confirm with the SET °F/°C
button and move to the next item.
HOUR: The hour will flash. Press and release the UP or DOWN buttons to select the correct
hour. Confirm with the SET °F/°C button and move to the next item.
MINUTES: The minutes will flash. Press and release the UP or DOWN buttons to select the
correct minutes. Confirm with the SET °F/°C button and move to the next item.
YEAR: The year will flash. Press and release
+
or
-
buttons to select the correct year.
Confirm with the SET °F/°C button and move to the next item.
MONTH: The month will flash. Press and release the UP or DOWN buttons to select the
correct month. Confirm with the SET °F/°C button and move to the next item.
DATE: The date will flash. Press and release the UP or DOWN buttons to select the correct
date. Confirm with the SET °F/°C button and exit the program menu.
Note:
The Day of the Week will set automatically after the year, month and date are set.
Note:
If no buttons are pressed for 20 seconds, the set mode times out.
No WWVB Tower Icon
The atomic wall clock has not received a WWVB time signal in the past 24 hours.
Position
the atomic wall clock for better reception.
Hold the
DOWN
button to send the Atomic wall clock on a WWVB signal search at night.
Allow up to 5 nights to receive the time signal.
Set Time Alarm
Press and release the ALARM button once to show Alarm Time. The letters AL will appear
where the seconds display.
