background image

 

21

Outdoor 

-39.8

°

F to 139.8

°

F with 0.2

°

F resolution 

(-39.9

°

C to 59.9

°

C with 0.1

°

C resolution) 

(“OFL” displayed if outside this range) 

Relative humidity range

 

Indoor 

1% to 99% with 1% resolution  
(Display “- -“ if temperature is OL.F; 
display “- -“ if < 1% and “99%” if > 99%) 

Air pressure

 

Relative hPa (adjustable) 

960 hPa to 1040 hPa 

Relative inHg (adjustable) 

28.35 inHg to 30.72 inHg 

Sensitivity setting hPa 

2 hPa to 4 hPa 

Air pressure history 

For the past 12 hours  
(0, -3, -6, -9, and -12 hours) 

Data checking intervals

 

Indoor temperature 

Every 15 second 

Indoor humidity 

Every 20 seconds 

Outdoor temperature 

Every 4 seconds 

Sensor reading update (within sensor)

 

Outdoor temperature 

Every 4 seconds 

Transmission frequency 

915 MHz 

Transmission range 

330 feet max. (100m) in open space 

Power supply

 

Wireless Weather Station

2 x AA (IEC LR6) 1.5V batteries. 

Remote Temperature Sensor: 

2 x AA (IEC LR6) 1.5V batteries. 

Dimensions (H x W x D) 

Wireless Weather Station

 

8.75” x 4” x 1.5” (222 x 102 x 38 mm) 

Remote Temperature Sensor 

5.05 x 1.50 x 0.83 inches (128.3 x 38.2 x 21.2 mm)

 

 

WARRANTY INFORMATION 

 

La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing 
defects in materials and workmanship. 
 
This limited warranty begins on the original date of purchase, is valid only on products purchased 
and used in North America and only to the original purchaser of this product.  To receive warranty 
service, the purchaser must contact La Crosse Technology, Ltd for problem determination and 
service procedures.  Warranty service can only be performed by a La Crosse Technology, Ltd 
authorized service center.  The original dated bill of sale must be presented upon request as proof of 
purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. 
 
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as 
stipulated herein, with new or reconditioned parts or products if found to be defective during the 
limited warranty period specified above.  All replaced parts and products become the property of La 
Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd.  Replacement parts and 
products assume the remaining original warranty, or ninety (90) days, whichever is longer.  La 
Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this 
warranty.  If necessary repairs are not covered by this warranty, or if a product is examined which is 
not in need or repair, you will be charged for the repairs or examination.  The owner must pay any 
shipping charges incurred in getting your La Crosse Technology, Ltd product to a La Crosse 

Summary of Contents for Tomorrow's Weather Today WS-7394U-IT
























Reviews: