43
1.
The hour and the minute digits will start flashing.
2.
Use the AL/HOUR key to set the hour; MODE/MIN key to set the minute.
3.
Confirm with the SNOOZE key and enter the
Calendar setting
.
Note:
•
The unit will still try and receive the signal every one hour despite it being
manually set. When it does receive the signal, it will change the manually set time
into the received time. Also the manually-set date and weekday will be changed to
the received date.
•
The time is displayed in 24-hour format.
CALENDAR SETTING :
The date default of the Projection clock is 1. 1. in the year 2005. Once the radio-
controlled time signals are received, the date is automatically updated. However, if the
signals are not received, the date can also be set manually.
1.
The year digits start flashing. Use the MODE/MIN key to set the year (the range
runs from 2000 to 2049).
