14
MANUAL TIME SETTING
In case the Weather Station is not able to detect the Atomic time (WWVB) signal
(disturbances, transmitting distance, etc.), the time can be manually set. The clock will then
work as a normal Quartz clock.
To set the clock:
1.
The hour digits start flashing in the time display section.
2.
Use the + key to adjust the hours and then press SET key to go to the minute setting.
3.
The minute will be flashing. Press the + key to just the minutes.
4.
Confirm with the SET key and enter the
“Calendar Setting”
or exit the setting mode
by pressing the CH key
Note:
•
The unit will still try to receive the signal at each full hour despite it being manually
set. When it does receive the signal, it will change the manually set time into the
received time.
•
The time format is fixed to "12-hr" time display. "PM" will be shown in hours from noon
to midnight.
CALENDAR SETTING
Minutes (flashing)
Hours (flashing)
Year
"Month. Date."
