La Crosse Technology, Ltd.
Page 13
RELATIVE PRESSURE SETTING: The
Relative Air Pressure
will flash. Press the ▲/DATE or
▼/RAIN button to adjust the Relative Air Pressure
.
Press and release the SET button to confirm and
continue.
Note:
Refer to your local weather reporting station for an appropriate setting. It is important that this
setting be adjusted for local conditions to ensure forecast accuracy.
FORECAST SENSITIVITY: The
Forecast Sensitivity
will flash. The default setting of
.09
works well
in most areas of the country, however in areas with relatively constant pressure this should be set to
.06, (within 30 miles of the coast) and in areas with significant pressure changes this should be set to
0.12 (within 30 miles of the desert). Press the ▲/DATE or ▼/RAIN button to adjust. Press and
release the SET button to confirm and continue.
STORM ALARM SENSITIVITY: The
Storm Alarm Sensitivity
will flash. The default setting of
.15
works well in most areas, however you may need to adjust this level up or down depending on your
local conditions. Use the ▲/DATE or ▼/RAIN button to adjust. Press and release the SET button to
confirm and continue.
STORM ALARM: AON or
AOFF
will flash. This will turn the Storm Alarm ON or OFF. Use the
▲/DATE or ▼/RAIN button to toggle the Storm Alarm ON (AON) and OFF (AOFF). Press and
release the SET button to confirm and continue.
WIND DIRECTION DISPLAY: The
Dash
in the wind compass will flash. Use the ▲/DATE or ▼/RAIN
button to select the Wind Direction to show in degrees (dash) or letters NNW. Press and release the
SET button to confirm and continue.
FACTORY RESET:
Res off
will display
. Use the ▲/DATE or ▼/RAIN button to select:
Res ON
only
if you wish to Factory Reset the Weather Center.
Res OFF
When you do not wish to restart the weather center, but were changing settings (time
date etc.).
Press and release the SET button to complete the program menu.
Note:
To Factory Reset the weather center, select
Res ON
and press the SET button to confirm. The
station will begin to count down numbers in the date area. When it is complete, it will say
done
. Then
remove the batteries and follow the Restart up procedure.
Change display
Modes:
Press and release SET button to toggle between the display of Mode 1 or Mode 2:
Mode 1
:
Wind Speed
24 hr. Pressure History Graph
Mode 2:
Wind Gust
72 hr. Pressure History Graph
Up Arrow:
Press and release to switch between Date and Seconds displayed.
Hold until the station beeps to resync with sensors.
Down Arrow:
Press and release to view 1-hour, 24-hour, 1-week, 1-month or Total Rainfall.
Hold to resync the display with the gateway.
Pressure inaccurate
to select the pressure unit of measure (
inHg
is common in the USA) and set
the actual Relative Pressure numbers on the display. The unit can set it to a known value from the
local reporting station.
Forecast Icons inaccurate
The weather forecasting feature is estimated to be 70% accurate. The weather forecast is based
solely upon the change of air pressure over time.
The icons are predicting 12-24 hours in the future, not current conditions. It may be sunny out your
window, but the pressure is falling so the forecast station will show clouds with rain icon.
