La Crosse Technology, Ltd
Page 2
Battery Backup:
•
CR2032 backup battery for time and alarm
When operating on battery only:
•
LCD will not show but clock will keep time and both the Light Alarm & Sound Alarm
will buzz at the scheduled time each day if active.
Alarm Clock Factory Restart
Use a pen or paper clip to press the factory RESET button on the back of the clock.
Language
•
This clock will show the weekday and directions in English (default), Spanish, French or
German.
•
Use the
12-Hour Time Format
•
This clock only has 12-hour time format.
Does the clock have a backlight?
Yes, this alarm clock has a backlight.
•
Tap the
button to adjust the backlight 5 levels of intensity.
•
Intensity Levels: 0FF | 1.5% | 20% | 50% | 100%.
LCD Backlight is not on:
Try this exercise in a dim room. The
will operate at five levels of intensity
(including OFF) at your discretion when using the power cable. Touch the DISPLAY button
a few times. Wait 15 seconds to see if backlight stays on. This will assure it is not in OFF
mode.
What is Auto Dim backlight?
You can set your backlight to automatically dim to level 1 at a set hour for sleeping, then
automatically return to full brightness when you wake.
Set Auto Dimming (Hour only).
1.
Hold the button 2 seconds to enter dimmer set mode. AUTO DIM OFF will show.
2.
Tap the + or – buttons to turn dimmer (ON). AUTO DIM ON will show.
3.
Tap the button to select start time (Hour) for dimmer. START TIME and the hour will
flash.
4.
Tap the + or – buttons to change the hour for the dimmer to be low light level.
5.
Tap the button to select start time for dimmer to be on High light level. STOP TIME
and the hour will flash.
