Search for Outdoor Sensor
Restart
• If your signal is lost, your station will display its LAST DATA
recorded from your sensor for 10 minutes.
• After that 10 minutes if the signal does not come back,
dashes will show.
• Hold the +/TEMP button for three seconds to search for your
outdoor sensor.
If your outdoor temperature is displaying dashes, and
searching for it does not work, try a restart following these
steps:
1. Remove the power cord and batteries from the alarm, as
well as the outdoor sensor.
2. Once the power is removed, press a button on the alarm at
least 20 times.
3. Wait 15 minutes, then insert power cord and fresh batteries
into your clock and sensor. Your temperature reading should
appear in the first minute.
Sensor
• To mount the sensor, use the hole at the top to either hang it
from the back using a nail, or insert one mounting screw
through the front of your sensor.
• Mount the TX141v3 sensor on a north-facing wall or in any
shaded area. Under an eave or deck rail is preferred.
• The maximum wireless transmission range to your weather
station is over 330 feet (100 meters) in open air, not including
walls or floors.
• Be sure the sensor is mounted vertically, to allow moisture to
drain out properly.
• Watch sensor mounting video:
http://bit.ly/TH_SensorMounting
Page | 7
www.lacrossetechnology.com/support
616-146v3
www.lacrossetechnology.com/support
Page | 8
• If the icon is displayed in the Outdoor Temperature section, replace
batteries in the outdoor sensor.
• If the icon is displayed in the Indoor Temperature section, replace
batteries in the projection clock.
Low Battery Icon
Let’s Get Social
JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide feedback on
our social media channels!
If you have ideas for features or support solutions you’d like to see us
make, please let us know! We truly want to make owning a La Crosse
Technology product not only a practical experience, but also a fun
one. So email us at:
Help Us, Help You!
