Multi-Color
Atomic Alarm Clock
Model: K84292 | Quick Setup Guide
The Atomic Alarm Clock features radio-controlled time, indoor
temperature, humidity and moon phase on a colorful, and easy to read
display. Includes backlight with dimmer, calendar with month, date,
weekday display and alarm with snooze. Use the integrated USB
charging port to charge your smartphone, camera or other devices
while you sleep.
MULTI-COLOR ATOMIC ALARM CLOCK
SETUP INSTRUCTIONS STEP BY STEP
STEP 1:
•
Insert the power adapter plug into a wall outlet
•
Insert the 5 volt A/C power adapter into the back of the atomic alarm
clock.
•
The atomic alarm clock will light up and display, indoor temperature
and time (12:00).
TROUBLESHOOTING
•
If the atomic alarm clock does not display the indoor temperature
after 30 seconds remove the a/c power adapter (batteries) and start
the setup process again.
STEP 2:
•
Slide tab up and pull out to remove the battery cover.
•
Insert 2 NEW AAA batteries (included) into the back of the atomic
alarm clock. Observe the correct polarity (see markings inside the
battery compartment).
•
Do Not Mix Old and New Batteries
•
Do Not Mix Alkaline, Standard, Lithium or Rechargeable
Batteries
PROGRAM MENU
The °F/°C SET button will move through the program menu. The
+
or
-
buttons will change a value.
•
WWVB ON/OFF:
Hold the °F/°C SET button 5 seconds. WWVB and
the word ON will flash. Press and release the
+
or
-
buttons to turn
this to OFF if you do not wish WWVB reception. Confirm with the
°F/°C SET button and move to the next item.
•
TIME ZONE:
EST will flash. Press and release the
+
or
-
buttons to
select a different Time Zone: AST=Atlantic, EST= Eastern, CST=
Central, MST= Mountain, PST= Pacific, AKT= Alaska,
HAT=Hawaiian time zone. Confirm with the °F/°C SET button and
move to the next item.
•
DAYLIGHT SAVING TIME
: DST will flash and the word ON. Press
and release the
+
or
-
buttons to turn this to OFF if you do not
observe DST. Confirm with the °F/°C SET button and move to the
next item.
•
12/24 HOUR TIME
: 12Hr will flash. Press and release the
+
or
-
buttons to select 24Hr. Confirm with the °F/°C SET button and move
to the next item.
•
HOUR
: The hour will flash. Press and release the
+
or
-
buttons to
select the correct hour. Confirm with the °F/°C SET button and move
to the next item.
•
MINUTES
: The minutes will flash. Press and release the
+
or
-
buttons to select the correct minutes. Confirm with the °F/°C SET
button and move to the next item.
•
YEAR
: The year will flash. Press and release
+
or
-
buttons to select
the correct year. Confirm with the °F/°C SET button and move to the
next item.
•
MONTH
: The month will flash. Press and release the
+
or
-
buttons
to select the correct month. Confirm with the °F/°C SET button and
move to the next item.
•
DATE
: The date will flash. Press and release the
+
or
-
buttons to
select the correct date. Confirm with the °F/°C SET button and exit
the program menu.
Note
: The Day of the Week will set automatically after the year,
month and date are set.
Note
: The set mode will time out after 20 seconds with no button
pressed.
FAHRENHEIT/CELSIUS
: Press and release the °F/°C SET button to
select temperature readings in Fahrenheit or Celsius.
ALARM SET
Hold the ALARM button to enter alarm time setting mode. The letters
“
AL
” will show in the second display.
1.
ALARM HOUR
: The Alarm Hour will flash.
Use the
+
or
-
buttons to set the Hour. Press
and release the ALARM button.
2.
ALARM MINUTE
: The Alarm Minutes will flash. Use the
+
or
-
buttons to set the Minutes. Press and release the ALARM button
to confirm. Press the SET button to return to time display.
ALARM ACTIVATION
1. Press and release the ALARM button once to show Alarm Time.
2. In alarm mode press and release the ALARM button to
activate or deactivate the alarm.
Note
: When the alarm sounds it will continue for two
minutes then shut off.
SNOOZE
•
When the alarm sounds, press the SNOOZE button to trigger snooze
alarm for 10 minutes. The snooze icon
Zz
will flash when the snooze
feature is active.
•
To stop alarm for one day, press the ALARM button, while in snooze
mode. The alarm icon will remain solid.
BUTTONS
Button
Press and Release
Functions
Hold 3 seconds
°F/°C SET
Move through program menu
(setup)
Select temperature in °F/°C
Enter program menu, Set
time, date, etc. (setup)
ALARM
Once
: View Alarm
Twice:
Activate or Deactivate
Alarm
Alarm set
+
1 step forward (setup)
Fast advance (setup)
_
1 step backward (setup)
Fast backward ( setup)
WWVB Search
LIGHT
(HI-LOW-OFF)
SNOOZE
Once
: Backlight LOW a/c)
Twice
: Backlight OFF (a/c)
Activate
backlight for 10
seconds (battery power)
Trigger snooze
(alarm active)
BACKLIGHT INTENSITY
Press and release the LIGHT (HI-LOW-OFF) button to adjust the
backlight intensity.
Operating on A/C Power
:
•
ON High intensity
•
ON Low intensity
•
OFF
Note:
When the Adapter is NOT in use, the High/Low/On/Off
features are not available.
Operating on Battery Power:
Press the LIGHT (HI-LOW-OFF) button to display the backlight for 10
seconds.
