La Crosse Technology 616-146A, Faqs

Page: 7 / 8

La Crosse Technology, Ltd. Page 7
USB Charge Port
The integrated USB charging port (on back) will charge your smart phone, camera or other
devices when the Projection Alarm is plugged into a power outlet.
Note : This is a power output (charging) port only. This port will not supply power to the
Projection Alarm Clock.

You cannot use a USB cord from the Projection Alarm Clock to your computer and operate
the Projection Alarm Clock.

Note: There is not a USB cord included with the Projection Alarm Clock.
Connect
your existing USB charging cord for your external device to the USB charging port
on the back of the Projection Alarm Clock to begin to charge. Charging times will vary.

Note : Check to be sure that your device will charge with the USB cord it came with. Many
USB cords are for data transfer only, and cannot be used for charging.

Output : 0.5 A maximum current USB Do NOT overload USB port

Note : Charging times will vary based on battery depletion and the individual device.

Note : Many devices may require more power to charge than provided by this Projection
Alarm Clock.
IMPORTANT: When operating on a/c power , the backlight, projection and USB charging
port will turn off while the Projection Alarm Clock searches for the WWVB signal, to avoid
interference. The backlight and projection will return after the 2-10 minute search (which occurs
during the late night or early morning hours). Then the USB charging port will resume working.
Projection Alarm Clock Has Distorted Display

On a brand new Projection Alarm Clock check for thin plastic films of printed scratch guard
that may be on the upper and lower screen of the Projection Alarm Clock. This thin piece of
plastic has printed numbers for store displays.

With all power removed the Projection Alarm Clock should be blank.

If numbers still appear, please check for scratch guard.

Check that the batteries and a/c cord are correctly installed.

This is generally a power related issue.

Batteries may be overpowered or underpowered. Remove batteries and a/c cord from
Projection Alarm Clock.

Press any button 20 times. Leave the batteries and a/c cord out of the display for 2 hours.

Insert a/c power cord into a good outlet first, then into the Projection Alarm Clock.
Projection Alarm Clock Has Missing Segments

This is generally a power related issue.

All or parts of numbers and letters will not show on the LCD.

Batteries may be overpowered or underpowered. Remove batteries and a/c cord from
Projection Alarm Clock.

Press any button 20 times. Leave the Projection Alarm Clock unpowered for 1-2 hours.

Insert the a/c cord into the outlet first then into the Projection Alarm Clock.

Alternatively, install fresh alkaline batteries with correct polarity.
Projection Alarm Clock Is Dim
A/C Power Operation:

Check that the a/c cord is correctly attached to the Projection Alarm Clock and outlet.

If using batteries in the Projection Alarm Clock as well, remove them and see if the
Projection Alarm Clock goes blank, indicating a faulty a/c cord.

Check the backlight HI/LO and ON/OFF settings. The backlight can be on high, low or off.