La Crosse Technology, Ltd. www.lacrossetechnology.com/support
Page 5
Check
Overpowered or underpowered batteries can cause this
reading.
Replace remote sensor.
Note:
The last remote reading may remain (not change) for several hours when
connection is lost. The remote temperature reading will flash when the connection
is first lost or intermittent.
Remote sensor drains batteries quickly
Test a new set of alkaline batteries. Write down the date of installation and the
voltage of the batteries.
When the batteries fail, please note the date and voltage again.
resistance
between the remote sensor and atomic clock.
Remote sensors at the end of the range may work while batteries are fresh but
not after they drain a bit.
Check for leaking batteries, which may damage the remote sensor.
Battery life is over 24 months when using reputable battery brands for both
Alkaline and Lithium batteries.
Remote sensor fell. The sensor no longer works
Explanation:
If there is no physical damage to the remote sensor, the fall may not
have caused internal damage. A fall can shock the remote sensor or the batteries in
the remote sensor. Batteries that have fallen on a hard surface may be damaged
and unable to function properly.
Complete a
dated at least six years in advance of the current year. Batteries
dated earlier than six years from now may still work but may be unstable in
performance.
Note:
A remote sensor that has fallen into puddle, snow, or other standing water,
will likely have water damage and need to be replaced. Remote sensors are water
resistant, not waterproof.
Replacement Remote sensors
Visit your local Retailer or La Crosse Technology® Store
http://store.lacrossetechnology.com/
Note
: Be sure to order the correct model and frequency to avoid receiving the
incorrect item.
Call La Crosse Technology® Store at
918-785-7939
or e-mail from the store
website if you are unsure about the correct item to order. Each item carries the
original new product warranty and includes access to La Crosse Technology®
technical support.
Temperature Trend Arrows
Explanation:
The indoor and remote temperature (2°F / 1°C) trend indicators
update every 30 minutes or less. These trends represent temperature changes over
the past three hours.
