Setup
Power up.
Insert 2-AA batteries into the sensor, then into the clock. Observe
the correct polarity.
Configure basic settings.
Hold the SET button for 3 seconds to enter settings
menu. Use the +/- buttons to adjust and SET to confirm.
AA
AA
Setting order:
1. Language: English | Español
2. Beep ON | OFF
3. Atomic ON | OFF
4. DST ON | OFF (Daylight Saving Time)
5. Time Zone
6. Hour
7. Minutes
8. Year
9. Month
10. Date
11. Fahrenheit | Celsius
Note:
When Español is selected, weekday and sub menu instructions will be in
Spanish. Calendar order: Day, Month, Year.
AA
AA
English | Español
Beep ON | OFF
Atomic ON | OFF
DST ON | OFF
Time Zone
Hour
AST
EST
CST
MST
PST
AKT
HAT
Atlantic
Eastern
Central
Mountain
Pacific
Alaskan
Hawaiian
Time Zone
Minutes
Year
Month
Date
Fahrenheit | Celsius
Atomic Time
• The station will automatically search for the atomic time signal at
UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• Press and release the SET button to search manually for atomic time signal.
• Press the SET button to select daylight saving time ON/OFF. If you do not
observe DST, use the +/- button to turn off the Daylight Saving Time Indicator.
• For information about WWVB visit:
http://bit.ly/AtomicTime
Place outdoor sensor outside in the shaded location and enjoy your weather
information.
Page | 1
www.lacrossetechnology.com/support
513-1417ALv4
513-1417ALv4
www.lacrossetechnology.com/support
Page | 2
Note:
When setting the hour, AM
indicates times before 12:00 (noon) and
PM indicates time after 12:00 (noon).
Note:
When the Atomic setting is set
to OFF, the menu will skip to item 6,
your Hour setting
