4. The mounting bracket has a square connection to prevent the
sensor from tipping.
5. Turn the knob to tighten the bracket to the pole.
Turn knob to
tight. Do not
over tighten
TX232TH Sensor
A
A
A
A
Fahrenheit/
Celsius
Transmission
Icon
Temperature
& Humidity
Alternate
1. Insert 2 AA batteries into the temperature/humidity sensor.
2. The red LED light will flash every 58 seconds when transmitting.
3. The transmission icon will show briefly when transmitting.
4. You can select a different channel on the sensor if you suspect
interference.
328-2314 www.lacrossetechnology.com/support Page | 4
TX
°C/°F
1 2 3
F/C for
Sensor
Channel
Selector
TX button
(Transmission
LED
Channel
Indicator
TX
°C/°F
1 2 3
Note:
Two hours after initial setup, the temperature/humidity
sensor will search for the Atomic time signal.
Note:
At temperatures below 14°F (-10°C) the sensor display will
turn off to protect the LCD. Sensor will still transmit data.