Initial Setup and Assembly
3. Insert pole into the bottom of sensor and secure with two screws.
Note:
Your own mounting pole (1.2 inches, 3.1 cm, not included)
may be inserted into the sensor, instead of using the
mounting bracket and pole included.
AA
AA
AA
TX231RW Multi-Sensor
Wind Cups
Bubble Level
for Mounting
Rain
Gauge
Direction Vane
Pole
Mounting
Bracket
Solar Panel
1. Install 3 AA batteries into the bottom of the Multi-sensor.
2. The red LED light on the bottom, will flash every 30 seconds
when transmitting.
Red LED
Drain Vents
for Rain
Page | 3 www.lacrossetechnology.com/support 328-2314
