La Crosse Technology, Ltd.
Page 10
Do not mount the sensors on a metal fence. This significantly reduces the
effective range.
Interference:
Consider items in the signal path between the sensors and the station.
Simple relocation of the sensors or the Wind speed station may correct an
interference issue.
Windows can reflect the radio signal.
Metal will absorb the RF (radio frequency) signal.
Stucco held to the wall by a metal mesh will cause interference.
Transmitting antennas from: ham radios, emergency dispatch centers, airports,
military bases, etc. may cause interference.
Electrical wires, utilities, cables, etc. may create interference if too close.
Vegetation is full of moisture and reduces signal.
Dirt: Receiving a signal through a hill is difficult.
WEATHER STATION
12-HOUR TIME FORMAT
Time display: 12-hour or 24-hour format.
Default is 12-hour time.
Use the Program Menu to switch time formats.
POWER REQUIREMENTS
3-AAA Alkaline batteries power the wind speed station.
MANUALLY SET TIME: PROGRAM MENU
The SET button will move through the program menu.
The
+ or -
button
will adjust values.
Press the LIGHT button at any time to exit.
Program Menu:
•
Beep On/Off
•
Atomic time signal (On/Off)
•
Time Zone
•
DST (Daylight Saving Time On/Off)
•
12/24 Hour time format
•
Hour
•
Minutes
•
Year
•
Month
•
Date
•
Fahrenheit/Celsius
•
MPH | KMH
The SET button will move through the program menu. To change a value use the
+
or -
button
.
1.
Hold the SET button five seconds so that BEEP and the word ON will flash. Press
and release the
+ or - button
to turn this to OFF to avoid beep sounds when
