La Crosse Technology 327-1414Wv2, Manual, Page: 2 / 12

La Crosse Technology, Ltd. Page 2
WWVB Atomic time Signal
..........................................................................................10
For information about WWVB visit:
.......................................................................................... 11
Backlight
.........................................................................................................................11
Forecast Icons inaccurate
...........................................................................................11
Weather station is blank: No letters, numbers or dashed lines
........................12
BATTERIES

Half of all warranty issues can be resolved with fresh batteries of the appropriate
voltage.

We suggest name brand alkaline batteries.

Use batteries dated at least six years in advance of the current year. Batteries
dated earlier than six years from now may still work, but may be unstable in
performance.

Alkaline batteries manufactured this year will have an expiration date 10 years
in the future. Battery technology has improved and batteries will maintain
voltage longer in storage. However, the environment the batteries reside in for
the 10 years can deplete the power.

Good name brand Alkaline batteries make less noise, which reduces the chance
of RF (radio frequency) interference from the battery compartment. A minimum
voltage of 1.48V for each battery is necessary for proper performance.
WEATHER STATION FACTORY RESTART
The factory reset will return the Professional weather station to its default settings.
This will clear all previous recorded history, so you may want to write down data
before taking this step.
1. Remove batteries from the sensor, batteries, and AC adapter from the weather
station.
2. Press any button 20 times. Leave unpowered for 15 minutes.
3. After 15 minutes insert batteries into the sensor, then insert batteries (optional
in the weather station) and plug AC adapter into the weather station.
4. Wait 15 minutes to establish a strong connection. Place sensor outside.
BATTERY CHANGE

After changing batteries in the sensor, hold the DOWN ARROW button for 5
seconds to search for the sensor.

If this fails to connect the sensor to the station, bring the sensor about 5 feet
from the station and complete a Factory Restart .
POWER REQUIREMENTS

2-C batteries power the wind/thermohygro sensor

3-AAA Alkaline batteries for the Professional weather station
COMPATIBLE SENSORS