La Crosse Technology, Ltd.
Page 10
6.
The hour will flash. Press and release the
▲
/
▼
buttons to select the correct
hour. Confirm with the TIME SET button and move to the minutes.
7.
The minutes will flash. Press and release the
▲
/
▼
buttons to adjust the
minutes. Confirm with the TIME SET button and move to the year.
8.
The year will flash. Press and release the
▲
/
▼
buttons to select the correct
year. Confirm with the TIME SET button and move to the month.
9.
The month will flash. Press and release the
▲
/
▼
buttons to select the correct
month. Confirm with the TIME SET button and move to the date.
10.The date will flash. Press and release the
▲
/
▼
buttons to select the correct
date. Confirm with the TIME SET button and move to F/C.
11.The Day of the Week will set automatically when the year, month and date are
set.
12.MPH will flash. Press and release the
▲
/
▼
buttons to select KPH. Confirm with
the TIME SET button and select Fahrenheit or Celsius temperature display.
13.°F will flash. Press and release the
▲
/
▼
buttons to select Fahrenheit or Celsius.
Confirm with the TIME SET button and exit.
WWVB ATOMIC TIME SIGNAL
The weather station receives the Atomic Time Signal (WWVB) from Fort
Collins, Colorado.
The station will search for WWVB signal up to 5 minutes, then return to
receiving the outdoor sensor.
The first search is 2 hours after startup.
The atomic time search initiates every six hours until successful reception.
The tower icon shows when sensor have received the signal.
The WWVB time signal can be received up to 2,000 miles away from Boulder
Colorado. However, due to the nature of the Earth’s Ionosphere, reception is
very limited during daylight hours. The Radio-controlled display will search for a
signal every night when reception is best.
Allow up to 5 nights for the change from Daylight Savings Time to Standard
Time and vice-versa to occur, depending on your location and atmospheric
conditions.
For best signal reception, follow these steps:
1.
Check for a Tower Icon showing on the display near the time and on the TH
sensor. The tower icon indicates successful reception of the WWVB signal in the
past 24-hours.
2.
Check that the Weather Station is in the correct Time Zone.
3.
This station offers seven time zones listed in letter format (default is EST):
•
AST Atlantic Time
•
EST Eastern Time
•
CST Central Time
•
MST Mountain Time
•
PST Pacific Time
•
AKT Alaskan Time
•
HAT Hawaiian Time
4.
Check that WWVB is ON. This must be ON to receive a WWVB signal.