background image

10

T

his equipment has been tested and found to 

comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against 
harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications. However, 
there is no guarantee that interference will not occur 
in a particular installation. If this equipment does 
cause harmful interference to radio or television 
reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try 
to correct the interference by one or more of the 
following measures: 

  Reorient or relocate the receiving antenna.
  Increase the separation between the equipment 

and receiver. 

  Connect the equipment into an outlet on a 

circuit different from that to which the receiver is 
connected. 

  Consult the dealer or an experienced radio/TV 

technician for help. 

This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, 
and 
(2) This device must accept any interference 
received, including interference that may cause 
undesired operation.

Caution!  

Any changes or modifications not expressly 
approved by the party responsible for compliance 
could void the user’s authority to operate the 
equipment.

FCC STATEMENT

CALIFORNIA RESIDENTS

                    

This product can expose you to chemicals 
including acrylonitrile, butadiene, and styrene, 
which are known to the State of California 
to cause cancer and birth defects or other 
reproductive harm. For more information, go 
to: 

www.P65Warnings.ca.gov

CA WARNING:

All rights reserved. 

This manual may not 

be reproduced in any form, even in part, or 
duplicated or processed using electronic, 
mechanical or chemical process without the 
written permission of the publisher.

This booklet may contain errors or misprints. 
The information it contains is regularly 
checked and corrections are included 
in subsequent editions. We disclaim any 
responsibility for any technical error or printing 
error, or their consequences.       

All trademarks and patents are recognized.

Summary of Contents for 308-1711BLV2











Reviews: