SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have
finished.
3
Regulations
Installation of this range must conform with local codes, or in
the absence of local codes, with the National Fuel Gas Code,
ANSI Z223.1/NFPA.54, latest edition.
In Canada, installation must conform with the current Natural
Gas Installation Code, CAN/CGA-B149.1 or the current
Propane Installation Code, CAN/CGA-B149.2, and with local
codes where applicable.
This range has been design-certified by CSA International
according to ANSI Z21.1, latest edition and CAN/CGA-22.2
latest edition.
Read the instructions before installing or using this appliance.
This range becomes hot in use, the maintop burners produce
exhaust gases. Take safety precautions - see the safety
warnings in the User Guide, which should be read together
with this installation guide.
The range must be electrically grounded in accordance
with local codes or, in the absence of local codes, in
accordance with the National Electrical Code (ANSI/NFPA 70,
latest edition). In Canada, electrical grounding must be in
accordance with the current CSA C22.1 Canadian Electrical
Code Part 1 and/or local codes.
Important
• Observe all governing codes and ordinances.
• The range must be properly grounded.
• Save these instructions for the local electrical
inspector’s use.
When servicing or replacing gas carrying components
disconnect from gas before commencing operation and
check appliance is gas sound after completion. When
checking for gas leaks use a liquid leak detector at all joints
and connections to check for leaks in the system. Use a
product specifically manufactured for leak detection. Leak
testing of the appliance shall be conducted in accordance to
the manufacturer’s instructions.
For Your Safety
Do not store or use combustible materials, gasoline or
other flammable vapors and liquids in the vicinity of this
or any other appliance.
If You Smell Gas
• Open windows.
• Don’t touch electrical switches.
• Extinguish any open flame.
• Immediately call your gas supplier.
Conversion to Propane
This appliance is supplied set for Natural gas. A conversion kit
for Propane gas is supplied with the range.
If the appliance is to be converted this must be done before
installation. The conversion must be performed by a qualified
LP gas installer. After conversion the installation must comply
with the relevant regulations and also the local electricity
supply company requirements. Read the instructions before
converting this appliance.
Failure to convert the appliance correctly could invalidate any
warranty or liability claims and lead to prosecution.
This instruction must be used in conjunction with the rest
of the appliance instruction, in particular for information on
Standards, range positioning, connection hose suitability etc.
When servicing or replacing gas-carrying components
disconnect from gas before commencing operation and
check appliance is gas sound after completion.
Do not use re-conditioned or unauthorized gas controls.
Orifices
Burner head
ArtNo.311-0034 - Burner head off
A
B
C
D
Brass venturi
Burner base
Burner ring
Remove burner heads. Undo the large brass nuts and
remove the brass venturis and rings.
Either:
Use a long socket wrench to access and remove the
old orifices.
Or:
Lift up the front of the maintop and prop it up at the
front. Remove the old orifices.
Save the orifices removed from the appliance for future
use. Install new orifices.
Natural Gas
Propane Gas
Center burner
205
118
Large Burners
150
99
Right front burner
112
68
Replace the rings on the burners. Screw in the hexagon
headed venturi to make fitting the burners easier. Do not
tighten yet.
When all the burner bases and venturis have been fitted
tighten the venturi nuts.
