INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
22
You will also need the following tools and equipment to
complete the range installation satisfactorily.
1.
Multimeter
2.
Electric drill
3.
Masonry drill bit & anchors (only required if installing
the range on a stone or concrete floor)
4.
Steel tape measure
5.
Phillips head screwdriver
6.
Flat head screwdriver
7.
2.5 mm Allen key (supplied with the range)
8.
Level
9.
Open-end or adjustable wrench
10. Pencil and ruler
11. Pipe wrenches
12. 13 mm spanner or socket wrench
Additional materials you may need:
• Gas line shut-off valve.
• Pipe joint sealant or UL-approved pipe thread tape
with Teflon* that resists action of natural and LP gases.
*Teflon: Registered trademark of DuPont
• Flexible metal appliance connector (½’’ I.D.). A 5 foot
length is recommended for ease of installation but
other lengths are acceptable. NEVER use an old
connector when installing a new range.
• Flare union adapter for connection to gas supply line
(¾’’ or ½’’ NPT x ½’’ I.D.).
• Flare union adapter for connection to pressure regulator
on range (½’’ NPT x ½’’ I.D.).
9. Installation
