Page 6
3.0 INSTALLATION
3.1
INSPECTION AND UNPACKING
The MS1224 Active Mic Splitter and Power Supply units have been carefully
packed at our factory in a carton designed to withstand handling in transit. Should
the unit appear to have been damaged in transit, notify your dealer immediately
and do not discard any of the packing. The carton should contain -
•
The MS1224 Active Mic Splitter or MS1224 Power Supply unit
•
Power cord
•
36 way Centronics cable (not with the Power Supply)
•
Operator Manual (this book)
3.2 OPERATING
ENVIRONMENT
The MS1224 Active Mic Splitter and Power Supply units are designed to operate
between 0°C and 40°C (32-112°F) with relative humidity no more than 80%.
Should the units be installed in an equipment rack, ensure that the ambient
temperature conforms to these levels.
3.3
CE STANDARDS AND THE LOW VOLTAGE DIRECTIVE (LVD)
The MS1224 Active Mic Splitter and Power Supply units have been designed to
comply with the latest Electromagnetic Compatibility (EMC) regulations. However
we recommend you do not operate the unit close to strong emitters of
electromagnetic radiation such as power transformers, motors, mobile telephones
or radio transmitters.
The unit should only be connected to a power supply of the type described in 3.4
POWER REQUIREMENTS or as marked on the unit. Disconnect the mains
supply before removing any cover.
See Section 6.3, concerning power requirements for the MS1224 Power Supply.
3.4 POWER
REQUIREMENTS
The MS1224 Active Mic Splitter is designed to work from low voltage DC supplies
only. The MS1224 Power Supply provides Phantom power (+48V) and Audio
supplies of +17V and -17V - see Section 6.0.
3.5 WARRANTY
Your LA Audio MS1224 Active Mic Splitter and Power Supply units have been
manufactured to a high standard using quality components. If correctly installed
and operated the unit should give years of problem free operation.
However in the event of a defect in material or workmanship causing failure of the
unit within 1 year of the date of original purchase we will agree to repair, or at our