L3 Systems KeyAT Manual Download Page 42

Page: 42 / 42

KeyAT Keyboard Port Adapter

L3 Systems

PO Box 2954,

Redmond, WA 98073

Tel: (425) 836-5438

http://www.l3sys.com

Fax: (425) 460-1011

The KeyAT Keyboard Port Adapter allows you to make an RS-
232 or RS-485 connection to a computer’s keyboard port, and
still use the keyboard. Typical uses are:

♦

Testing Software

- Test software by sending it simulated

keystrokes from another computer.

♦

Multi-system Testing

- Use host system to simulate

keystrokes for up to 58 computers.

♦

Remote Access

- Use the KeyAT to remotely access

systems where software does not provide other options.

♦

Monitor Keyboard Sessions

- You can monitor keyboard

session to develop keyboard test scripts.

♦

Connect a Keyboard to an RS-232 Port

- You can use a

KeyAT to connect a keyboard to a computer's RS-232
port, and receive key codes from the keyboard.

♦

Attaching input devices

– Allows you to attach RS-

232/RS-485 devices to the keyboard port such as bar
code readers, scales, and credit card readers.

Some advanced features of the KeyAT Adapter are:

♦

Accepts a Variety of Keyboard Data

- Accepts printable

ASCII and encoded ASCII Hex, DOS scan codes, and
direct keyboard key codes.

♦

LED Use Indicator

- Status of remote connect.

♦

Computer Keyboard Port Cable Provided

- Just plug it

in and go.

Summary of Contents for KeyAT









































Search results

Summary of Contents for KeyAT

Reviews:

Related manuals for KeyAT

Brands by name

Popular brands

L3 Systems KeyAT, Manual

Search results

Summary of Contents for KeyAT

Reviews:

Related manuals for KeyAT

Brands by name

Popular brands